Change font size


Post a new topicPost a reply Page 1 of 2   [ 11 posts ]
Go to page 1, 2  Next
Author Message
 Post subject: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Fri Aug 11, 2017 3:27 pm 
User avatar

Vehicle: 2000 5MT

Posts: 17
Location: USA
Hey guys, hopefully someone here has done this mod. I have a 2000 USDM Foz that only has normal the power adjustment on the mirrors. There is a guy parting out a JDM SF5 STI in Canada and I am getting the power folding mirrors and the switch off of him.

Now, does anyone know how I would wire up the power folding portion of the switch, since my car originally only has the normal power adjustment? Is the wiring already in the car for that, and the mirrors are just plug and play? They do not have a heated option...only folding option.

Any help would be greatly appreciated! Thanks in advance!


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Fri Aug 11, 2017 3:34 pm 
User avatar

I Say: Keep the hammer down
Vehicle: 02GT/6MT

Posts: 31396
Location: SE MEL
Its dependant on the wiring. On the audm there are two wires missing in the across car loom, replace those and it all works.
On the usdm you would need to check the wiring. Also note that the mirrors and angles due to lhd are different.

_________________
Image
Gallery and specs, click picture above.

Always getting logged out? Drop the .au, ozfoz.com.au

Wanted to buy: Rays Volk CE28N 17x8 +44 PCD5x100 10 spoke, Qty: 1


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Fri Aug 11, 2017 3:39 pm 
User avatar

Vehicle: 2000 5MT

Posts: 17
Location: USA
waali wrote:
Its dependant on the wiring. On the audm there are two wires missing in the across car loom, replace those and it all works.
On the usdm you would need to check the wiring. Also note that the mirrors and angles due to lhd are different.


The mirror glass itself would need to be swapped with my stock ones for sure, due to the whole "objects in mirror" thing. My main concern is the wiring. Where you wire up the two wires in the AUDM cars? I might poke around and cross reference between how you wire the AUDM cars and see if those spots exist in the USDM cars


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Fri Aug 11, 2017 4:34 pm 
User avatar

I Say: Looks like I picked the wrong week to quit drinking.
Vehicle: 03XS Auto-Red;Mercedes Valente

Posts: 21744
Location: Central Coast, NSW
Search is your friend, click here.

_________________
The Red Dragon
Voted Best NA 2013 OzFoz Rally
Image

The Red Dragon's Dyno Sheet


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Fri Aug 11, 2017 8:11 pm 
User avatar

I Say: Keep the hammer down
Vehicle: 02GT/6MT

Posts: 31396
Location: SE MEL
Another link here with the wire colours.

viewtopic.php?p=439662#p439662

_________________
Image
Gallery and specs, click picture above.

Always getting logged out? Drop the .au, ozfoz.com.au

Wanted to buy: Rays Volk CE28N 17x8 +44 PCD5x100 10 spoke, Qty: 1


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Sat Aug 12, 2017 2:25 am 
User avatar

Vehicle: 2000 5MT

Posts: 17
Location: USA
So the mirror switch itself...will it have 5 pins on it then? The connector going to the switch should have 5 wires? I will have to check my switch and wiring and see how many pins/wires I have going to it. If it doesn't have 5 wires, I assume it will be much harder to install the mirrors?


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Sat Aug 12, 2017 6:33 am 
User avatar

Vehicle: JDM SF STi Pure White

Posts: 95
Location: Germany
00sf5 wrote:
So the mirror switch itself...will it have 5 pins on it then?


From what i remember there are more than 5 pins on that switch. But i'd have to take a look in there again to be 100% certain.


Top
 OnlineProfile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Sat Aug 12, 2017 9:02 am 
User avatar

I Say: Keep the hammer down
Vehicle: 02GT/6MT

Posts: 31396
Location: SE MEL
The mirrors have 5 wires, the controller has more.

_________________
Image
Gallery and specs, click picture above.

Always getting logged out? Drop the .au, ozfoz.com.au

Wanted to buy: Rays Volk CE28N 17x8 +44 PCD5x100 10 spoke, Qty: 1


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Sun Aug 13, 2017 11:08 am 
User avatar

Vehicle: 2000 5MT

Posts: 17
Location: USA
The stock mirrors have 3 wires coming off, correct? The power folding mirrors have 5 wires?

So this means the body side of the mirror harness will have 5 wires, right? Even though the stock mirrors have 3 wires....the other 2 pins are unused, but the wiring should be there?


Top
 Profile  
 
 Post subject: Re: JDM SF5 STI Power Mirrors...How To Wire?
PostPosted: Sun Aug 13, 2017 11:29 am 
User avatar

I Say: Keep the hammer down
Vehicle: 02GT/6MT

Posts: 31396
Location: SE MEL
In the JDM/AUDM, Yes. The USDM model is an unknown.

_________________
Image
Gallery and specs, click picture above.

Always getting logged out? Drop the .au, ozfoz.com.au

Wanted to buy: Rays Volk CE28N 17x8 +44 PCD5x100 10 spoke, Qty: 1


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 2   [ 11 posts ]
Go to page 1, 2  Next


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
"Takka LE" for phpBB3