Change font size


Post a new topicPost a reply Page 16 of 17   [ 162 posts ]
Go to page Previous  1 ... 13, 14, 15, 16, 17  Next
Author Message
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Sun Jul 28, 2013 5:28 pm 
User avatar

Vehicle: MY09 XT 5MT - Silver

Posts: 708
Location: Geelong,Victoria
Nice!

_________________
To ensure perfect aim, shoot first, then call whatever you hit the target!


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Tue Nov 11, 2014 3:56 pm 
User avatar

I Say: Bright DRLs are like Kath and Kim's "Look at moy......"
Vehicle: MY13 XTP

Posts: 383
Location: OZ
Hi guys, sorry to bump an old post. Has anyone done/know how to use this on SJ model? Thanks heaps.


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Thu Jan 29, 2015 2:25 pm 
User avatar

I Say: Sweet as bro
Vehicle: MY01 GT

Posts: 61
Location: Sydney
Cheers


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Mon Sep 28, 2015 9:37 pm 
User avatar

Vehicle: MY11 X - Spark Silver

Posts: 1
Location: Queensland
Hi everyone, Can you tell me which hose/port to use to spray the UEC into the inlet manifold of Forester 2011 non-turbo FB25 engine? Thank you.

pics of the engine

left side:
https://onedrive.live.com/redir?resid=9 ... hoto%2cjpg

front:
https://onedrive.live.com/redir?resid=9 ... hoto%2cjpg

right side:
https://onedrive.live.com/redir?resid=9 ... hoto%2cjpg


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Thu Oct 01, 2015 3:12 pm 
User avatar

I Say: There's no 'i' in Team, but there is in Winner!
Vehicle: MY10 XT

Posts: 1413
Location: Mealbun Orstraya
I would assume to just find the most centralized one which is easy to access.


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Sat Nov 14, 2015 7:38 pm 
User avatar

Vehicle: my09 xt

Posts: 602
Location: Brisbane
I do mine every 5K oil change not a single bit of smoke comes out SH9 XT

_________________
Resident gym junkie/car detailer

MY09 FXT

RE002 STI QUAD TIPS STI REAR SWAYBAR TH TUNED TO 16PSI

In the hunt for a BMW E46 M3 manual\tbsti wagon manual


Top
 Profile  
 
 Post subject: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Sun Aug 13, 2017 11:32 am 
User avatar

Vehicle: MY11 S-Edition - SWP

Posts: 643
Location: Sydney
I used the BOV hose on my MY11 S-Edition to spray in the UEC. I found spraying half the can in before starting the engine was near impossible as the UEC just overflowed out the hose if I sprayed in any more than a very very small amount. I then had to wait 30sec and repeat. After 10min I gave up. Started the engine and sprayed the remainder of the can in with no problem as with the engine running the UEC is sucked in. Turned the car off for 10min and started. All good.

_________________
2011 S-Edition SWP


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Sun Aug 13, 2017 8:30 pm 
User avatar

Vehicle: JDM SF STi Pure White

Posts: 105
Location: Germany
Speaking of UEC, is that a US/AU only product or how come i can't find it anywhere in EU?


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Sun Aug 13, 2017 10:10 pm 
User avatar

Vehicle: MY05 XT - Silver

Posts: 365
Location: Sydney
Australian made product by a company called Bars Leaks here in Sydney for Subaru Australia.

_________________
MY05 Forester XT with MRT XA


Top
 Profile  
 
 Post subject: Re: DIY - How to use Upper Engine Cleaner (UEC)
PostPosted: Sun Aug 13, 2017 10:42 pm 
User avatar

I Say: Keep the hammer down
Vehicle: 02GT/6MT

Posts: 31465
Location: SE MEL
jonp wrote:
I used the BOV hose on my MY11 S-Edition to spray in the UEC. I found spraying half the can in before starting the engine was near impossible as the UEC just overflowed out the hose if I sprayed in any more than a very very small amount. I then had to wait 30sec and repeat. After 10min I gave up....

This crapped me off as well so I cobbled together a custom hose for this job.

Standard diameter hose from the manifold to a joiner connected to a smaller vac hose.
You then part insert one of the small tubes that comes with the UEC and cable tie the end of the smaller vac hose, perfect seal every time.

_________________
Image
Gallery and specs, click picture above.

Always getting logged out? Drop the .au, ozfoz.com.au

Wanted to buy: Rays Volk CE28N 17x8 +44 PCD5x100 10 spoke, Qty: 1

Wanted to buy: Super-VHS VCR, JVC/Panasonic in good condition


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 16 of 17   [ 162 posts ]
Go to page Previous  1 ... 13, 14, 15, 16, 17  Next


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
"Takka LE" for phpBB3