Change font size


Post a new topicPost a reply Page 1 of 1   [ 5 posts ]
Author Message
 Post subject: Project MU NS400 vs Winmax W1
PostPosted: Sun Dec 17, 2017 12:01 am 
User avatar

I Say: 3 letters in the alphabet that should never be attributed to me...DIY

Posts: 615
G'day guys..looking to get pads for the brembo install shortly. Any suggestions on what pads of these 2 or anyone else with some ideas with no squeal and minimal dust

_________________
MY11 DGM S-Edition Build

190.6 atwkw | MSR | Invidia | STi | Process West | Cobb | Turbosmart | PSR | Pierburg | Whiteline | Perrin | Cusco | Hella | ROH


Top
 Profile  
 
 Post subject: Re: Project MU NS400 vs Winmax W1
PostPosted: Mon Dec 18, 2017 10:34 am 
User avatar

Vehicle: MY12 XTP - BLAAAACK

Posts: 78
Location: Canberra
I can't comment on the Winmax, I did just recently put in the NS400's and DBA T2's and so far I am very impressed. Completely changed the braking performance of the car. I have the Lib GT brakes on the front and they came with stock rotors and I think Bendix pads that were pretty unresponsive. The pads I have found have a soft initial bite when cold. However after one or two stabs of the pedal they are great. When you get them hot they stop on a dime. Noise was slight for the first 500km while they settled in and only at low speeds like stop start traffic. Dust so far is minimal I thought it would be a lot more with the slotted rotors as well, but pretty happy with the new set up.

_________________
My Foz


Top
 Profile  
 
 Post subject: Re: Project MU NS400 vs Winmax W1
PostPosted: Thu Jan 18, 2018 4:37 pm 
User avatar

I Say: Plan for tomorrow,Live for TODAY!
Vehicle: MY12 XT

Posts: 42
Location: Sydney
I went for the T3's, I agree I feel the difference.

My experience is that the dust was only an issue when I only had the from done. Once I put the slotted rears on, the dust reduced considerably, the brake pedal felt different too.

It feels much more predicable braking under load.

_________________
Silver Fox !
VF-52 with Lava turbo blanket, 11psi Wastegate Spring, 3 port Company23 Anti-Surge BCS, 3" Mishimoto CAI, PSR Intake, Headers & Up-pipe in Lava wrap, Large TMIC, GFB BOV, Grimmspeed AOS, 3" TBE, Front & Rear Whiteline Heavy Duty Anti-Sway bars, KiddoRacing 18psi Tune for E85, Short shifter - 220kw atw


Top
 Profile  
 
 Post subject: Re: Project MU NS400 vs Winmax W1
PostPosted: Thu Jan 18, 2018 8:24 pm 
User avatar

I Say: Do or do not, there is no try.
Vehicle: MY17 BRZ, MY11 BT-50

Posts: 16160
Location: Medowie (near Newcastle), NSW
worried about dust on black wheels????????

_________________
:drinks: Bob
Often cynical and/or sceptical
New Ride MY17 BRZ Last Ride Image Previous Ride Image


Top
 Profile  
 
 Post subject: Re: Project MU NS400 vs Winmax W1
PostPosted: Tue Feb 13, 2018 2:21 pm 
User avatar

I Say: 3 letters in the alphabet that should never be attributed to me...DIY

Posts: 615
be_oh_be wrote:
worried about dust on black wheels????????


haha yeah mate...they're matte so it shows up a heap of dust...what will you put in the brz??

tuspeed didnt get the PMu stock so now im looking at W1's

_________________
MY11 DGM S-Edition Build

190.6 atwkw | MSR | Invidia | STi | Process West | Cobb | Turbosmart | PSR | Pierburg | Whiteline | Perrin | Cusco | Hella | ROH


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 1   [ 5 posts ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
"Takka LE" for phpBB3