Change font size
It is currently Sat Nov 25, 2017 6:24 pm


Post a new topicPost a reply Page 1 of 2   [ 17 posts ]
Go to page 1, 2  Next
Author Message
 Post subject: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Tue Jun 28, 2016 6:10 pm 
User avatar

I Say: R is for RACE!
Vehicle: '15 CWP 6mt Rex

Posts: 7078
Location: Sydney
Hey Ozfozzers! For those that do not use Facebook.

We are extremely pleased to announce that we have a Mainline AWD1200L Dyno on the way! ETA is this August!!!

With the acquisition of this dyno, it will allow us to further our tuning n testing capabilities and provide more services to our customers including power runs, more advanced diagnostics and troubleshooting, and the fun stuff… hosting dyno days!

It is a very exciting time for us and over the coming weeks, we will be making some changes in the workshop to accommodate, so please stay tuned for updates!

-Team Rumble Shack

Image

Image

_________________
MY15 CWP 6mt WRX

The Rumble Shack - Subaru Mechanical and Performance Workshop
Check our vendor section or Find us on Facebook!

ECU Tuning info! Click here for info


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Tue Jun 28, 2016 7:40 pm 
User avatar

I Say: I have CDO. It's like OCD except the letters are in alphabetical order, as they should be.
Vehicle: MY05 XTL - Black

Posts: 5057
Location: Tanah Merah - Brisbane
Winner, winner chicken dinner :thumbs:

_________________
Current Ride - 05 XT Foz
Previous Ride - Your mum ;)

housemusik wrote:
H-are wrote:
Are you going 6 speed for the strength of it?
I just want to do skids bro :lol: DCCD ftw


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Tue Jun 28, 2016 9:42 pm 
User avatar

Vehicle: MY05 XT - Regal Blue

Posts: 170
Location: Sydney
Great move guys!

:thumbs:


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Tue Jun 28, 2016 10:57 pm 
User avatar

I Say: Car mods are like OddBodz, you got to collect them all! -------------------------------------
Vehicle: MY05 STi swapped sled

Posts: 17141
Location: Spearwood Perth WA
How much pesos for a dyno?

_________________
>>>My Ride<<<


Image


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Wed Jun 29, 2016 9:20 am 
User avatar

I Say: Fozzy fozzy fozzy, oi oi oi!
Vehicle: 2011 Forester S-Edition WRB

Posts: 1302
Location: 3015
Bram wrote:
How much pesos for a dyno?


My mate paid 60K for his - Dyno Dynamics

_________________
My WRB SH9 S-Editon: viewtopic.php?f=12&t=52453


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Wed Jun 29, 2016 10:16 am 
User avatar

I Say: Keep the hammer down
Vehicle: 02GT/6MT/Modtown

Posts: 31494
Location: SE MEL
Bram wrote:
How much pesos for a dyno?

Bram's tune hut? :lol:

_________________
Image
Gallery and specs, click picture above.

Always getting logged out? Drop the .au, ozfoz.com.au

Wanted to buy: Rays Volk CE28N 17x8 +44 PCD5x100 10 spoke, Qty: 1


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Wed Jun 29, 2016 10:27 am 
User avatar

I Say: Car mods are like OddBodz, you got to collect them all! -------------------------------------
Vehicle: MY05 STi swapped sled

Posts: 17141
Location: Spearwood Perth WA
waali wrote:
Bram wrote:
How much pesos for a dyno?

Bram's tune hut? :lol:

My garage does everything else :lol:


Nah. Tuning is not for me. I can turn a spanner pretty well. Wire up virtually anything to anything. And do almost everything else on a car. But tuning is one area i think i should stay the fuk away from. I was just curious how much they cost.

_________________
>>>My Ride<<<


Image


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Wed Jun 29, 2016 12:47 pm 
User avatar

I Say: R is for RACE!
Vehicle: '15 CWP 6mt Rex

Posts: 7078
Location: Sydney
Tremayne_XT wrote:
Winner, winner chicken dinner :thumbs:


doz180 wrote:
Great move guys!

:thumbs:


Thanks guys!

Bram wrote:
How much pesos for a dyno?


We got the AWD1200L series which is Mainlines Entry level model. Cost is about $100K+ what goodies you get. Then u have Ventilation unit too.
We were looking at a Dynotech by Dyno Dynamics, but we decided on the Mainline simply because it is what most other shops use etc.

_________________
MY15 CWP 6mt WRX

The Rumble Shack - Subaru Mechanical and Performance Workshop
Check our vendor section or Find us on Facebook!

ECU Tuning info! Click here for info


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Wed Jun 29, 2016 6:24 pm 
User avatar

I Say: Some people just like to make themselves sound great.............. others make great sounds!
Vehicle: SWP MY11 SediTIon + a monster

Posts: 1594
Location: Sydney
Good stuff Dan and team.

_________________
swinno wrote:
I knew it was only a matter of time before dazza had something that i wanted...................


Image


Top
 Profile  
 
 Post subject: Re: The Rumble Shack is getting a Mainline Dyno! ETA August!!!
PostPosted: Wed Jun 29, 2016 7:33 pm 
User avatar

I Say: I run with scissors....
Vehicle: MY05 XT - 6MT Obsidian Black

Posts: 1969
Location: Blue Mountains N.S.W
dazzz168 wrote:
We got the AWD1200L series which is Mainlines Entry level model. Cost is about $100K+ what goodies you get. Then u have Ventilation unit too.
We were looking at a Dynotech by Dyno Dynamics, but we decided on the Mainline simply because it is what most other shops use etc.

Good stuff guys :ok:
On our 3rd dyno now (1x dyno dynamics roller, 1x mainline 1200awd roller and now the new pro hub) Mainline are the goods, you will be happy with it :)
A good ventilation system is a must.
Make sure it is designed a little bit over kill for what you think you need especially if it will be in an open workshop.
Our new setup can circulate the entire rooms volume of air ~3 times a second :lol:

_________________
Bram wrote:
You just dont realise how gay XTs are in stock form until you modify one.

MY05 XT DCCD 6mt-Borgwarner EFR7670-Forged-Haltech elite-Flex fueled- 98 = 305.1kwatw @23psi E70=340.0kwatw @23psi


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 2   [ 17 posts ]
Go to page 1, 2  Next


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
"Takka LE" for phpBB3