That's awesome!

Freaking awesome. So envious. The things i would make, if i knew how to machine and had the gear.

lucky bugger, I wish I had half of that setup

Thanks gents.

I can only imagine what you could do with this gear Bram.
You would billet and customize everything.

Your car is already a weapon and you continually do awesome work, it's always good checking in on your build thread.

I think we have a similar DIY approach, where possible I would rather have a go at something myself and learn a bit along the way than just pay some to do it for me.

^^ Fixed.

Totally agree with the above. Had some bad experiences with poor quality work in the past.
You still find people that do quality work but usually have to wait a while.

Bram, your collection of kit is rather enviable as well

Full shed/tool envy here from me to the both of you

Tony, what height are the walls of your shed 2.7m or 3m? The hoist works nicely there. Looks tempting

The shed walls are 2.8m high.

I only have 3.5m floor to roof at the peak of the shed roof but luckily the Forester just fits with the hoist at full height.

I was initially worried that I would have to reduce the max height of the hoist but was plesently suprised when I had clearance at full height.

The hoist had to be positioned centrally under the peak of the roof otherwise I would not of reached full height travel without the car hitting the roof.

Mmm, I have 2.7m walls and 3.2m to centre peak.

Thanks for the info.

Do want....

I think I would still have about 150mm of clearance if I took the roof racks off, I can check next time I have the car on there

I am not sure how the SF compares to the SG body height wise but you might get close to full height in your shed.