Change font size
It is currently Tue Jun 19, 2018 11:14 pm


Post a new topicPost a reply Page 5 of 5   [ 50 posts ]
Go to page Previous  1, 2, 3, 4, 5
Author Message
 Post subject: Re: Chips '01 SF S/tb -JDM interior bits Pg4
PostPosted: Fri Jan 19, 2018 9:53 pm 
User avatar

I Say: Needs more positive manifold pressure.
Vehicle: MY01 S/tb - MY01 STi II Type M

Posts: 4920
Location: Port Macquarie, NSW
Standard radiator and hoses were showing signs of imminent failure. Not something I wanted to go through in the middle of summer. So replacement Golpher rad and Logpro hoses installed. Along with this the Transmission and front diff also got a service.

Image
Image

_________________
MY01 STi II Type M -Garage Ornament
MY01 S/tb -The New Daily
MY00 Limited -The Old Daily
MY01 GT -Unfinished Project


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -Alloy Radiator pg5
PostPosted: Sat Jan 20, 2018 12:26 pm 
User avatar

Vehicle: MY99 GT

Posts: 60
Location: Mornington Pen., Victoria
Looking good, and onya for spotting it early.

Can I ask where you bought the logpro parts from?

_________________
My 1999 GT


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -Alloy Radiator pg5
PostPosted: Sun Jan 21, 2018 9:16 am 
User avatar

I Say: Needs more positive manifold pressure.
Vehicle: MY01 S/tb - MY01 STi II Type M

Posts: 4920
Location: Port Macquarie, NSW
I got them from a group buy on here a few years ago.

_________________
MY01 STi II Type M -Garage Ornament
MY01 S/tb -The New Daily
MY00 Limited -The Old Daily
MY01 GT -Unfinished Project


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -Alloy Radiator pg5
PostPosted: Sun Jan 21, 2018 2:00 pm 
User avatar

Vehicle: MY12 XT Premium Auto White

Posts: 381
Location: Brisbane
Cardude wrote:
Looking good, and onya for spotting it early.

Can I ask where you bought the logpro parts from?


Exactly my question too!

Group Buy years ago and you had not fitted them! Why????

Cheers Al


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -Alloy Radiator pg5
PostPosted: Mon Jan 22, 2018 8:03 am 
User avatar

I Say: Needs more positive manifold pressure.
Vehicle: MY01 S/tb - MY01 STi II Type M

Posts: 4920
Location: Port Macquarie, NSW
Forester4thetrees wrote:
Cardude wrote:
Looking good, and onya for spotting it early.

Can I ask where you bought the logpro parts from?


Exactly my question too!

Group Buy years ago and you had not fitted them! Why????

Cheers Al

I originally bought them with plans to use them as part of a turbo conversion in my NA. Then I bought the gold GT and never got around to doing any engine work on that before I got the Type M. The hoses in the Type M are in great condition and wont need changing for quite a while. So that's how they ended up in the S/tb.

I still have a Logpro GT Y pipe and SFB laying around I think. I won't endup using them if I do.

_________________
MY01 STi II Type M -Garage Ornament
MY01 S/tb -The New Daily
MY00 Limited -The Old Daily
MY01 GT -Unfinished Project


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -Alloy Radiator pg5
PostPosted: Thu Jan 25, 2018 7:26 pm 
User avatar

Vehicle: MY01 Forester GT Luxury

Posts: 455
Location: Brisbane
Nice. My GT came with the brushed style radio surround like that but I always wanted the other bits to match.


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -Alloy Radiator pg5
PostPosted: Thu Mar 01, 2018 8:11 pm 
User avatar

I Say: Needs more positive manifold pressure.
Vehicle: MY01 S/tb - MY01 STi II Type M

Posts: 4920
Location: Port Macquarie, NSW
I bought a full 3" TBE with MRT diff back section off Facebook last weekend. I got a splitter welded into the dump pipe and had it fitted today. It's very quiet for a 3" system. Perfect for a daily.

Image
Image
Image

_________________
MY01 STi II Type M -Garage Ornament
MY01 S/tb -The New Daily
MY00 Limited -The Old Daily
MY01 GT -Unfinished Project


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -3" TBE pg5
PostPosted: Thu Mar 15, 2018 6:52 pm 
User avatar

I Say: Needs more positive manifold pressure.
Vehicle: MY01 S/tb - MY01 STi II Type M

Posts: 4920
Location: Port Macquarie, NSW
As the JDM S/tb's didn't get armrests in the front chairs till the last year of manufacture I've been eagerly awaiting this part ever since I got the car.

Image

_________________
MY01 STi II Type M -Garage Ornament
MY01 S/tb -The New Daily
MY00 Limited -The Old Daily
MY01 GT -Unfinished Project


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -3" TBE pg5
PostPosted: Wed Apr 11, 2018 6:23 pm 
User avatar

I Say: Needs more positive manifold pressure.
Vehicle: MY01 S/tb - MY01 STi II Type M

Posts: 4920
Location: Port Macquarie, NSW
Got the front windows tinted to match the factory privacy glass the other day.

Image

_________________
MY01 STi II Type M -Garage Ornament
MY01 S/tb -The New Daily
MY00 Limited -The Old Daily
MY01 GT -Unfinished Project


Top
 Profile  
 
 Post subject: Re: Chips '01 SF S/tb -Window Tint pg5
PostPosted: Sun Jun 10, 2018 8:45 pm 
User avatar

I Say: Needs more positive manifold pressure.
Vehicle: MY01 S/tb - MY01 STi II Type M

Posts: 4920
Location: Port Macquarie, NSW
Took advantage of some time off over this long weekend and put some new pads and rotors in the front of this thing.

As I was getting some decent shudder up during moderate to heavy braking over 60km/h the old rotors had a warp in them. Although they have plenty of meat left and would certainly be able to be machined flat I took the opportunity to upgrade to a set of DBA T2's to match the Intima Street Series pads I put in.

I also changed out the fluid as the first 10cm or so of fluid in the front had become discolored and I found a few air bubbles in the rear. So pedal feel has been significantly improved now as well.

While I was under there I discovered the front right inner CV boot has split and spewed CV grease everywhere. On the drive to bed the new pads and rotors in I also think I heard the faintest CV click. So to be safe I'll replace the shaft.

I've also ordered an AVO intake, Fuel pump, Wideband AFR controller, Tuspeed 3 port BCS and, intake manifold gaskets. This should be everything I need to install before getting a tune and winding the boost up a few PSI.

Anyway, pictures!

Image

_________________
MY01 STi II Type M -Garage Ornament
MY01 S/tb -The New Daily
MY00 Limited -The Old Daily
MY01 GT -Unfinished Project


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 5 of 5   [ 50 posts ]
Go to page Previous  1, 2, 3, 4, 5


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
"Takka LE" for phpBB3